QuStream’s Cheetah V5-DVI modules allow transmission of DVI or RGBHV video and stereo audio, such as from a computer, over a single coaxial cable (or optional fiber optic link) to remote location or to a routing
switcher. Every Cheetah V5-DVI system is composed of transmitting and receiving modules. Modules may be used as stand-alone “bricks” or mounted in a single rack that can holds up to 4 modules.
Cheetah V5-DVI modules offer a great deal of flexibility in planning and configuring an A/V extender system. Typical applications range from a very basic extender installation using a single source origination computer and one Cheetah V5-DVI extender system to large systems using any number of Cheetah V5-DVI transmit modules for each A/V origination source and any number of the receiving modules for each A/V destination point. Incorporating a video matrix switcher in the system allows any A/V destination point access to any available A/V source.
Cheetah V5-DVI modules can be installed together with Cheetah HD router to create the perfect high resolution DVI or VGA routing and distribution system from 16x16 up to 1024x1024.
Features
-
DVI or VGA extenders over coax or optical fiber
-
Supports distances up to 10km / 6 miles over single mode optical fiber
-
Supports 48KHz Stereo Audio Embedding
-
Supports multi and single mode cable
-
Requires only single fiber or coax cable to route audio and video signal
-
Stand-alone or up to 4 modules 1RU rack mount
-
Allows mix and match fiber transmitter (TX) and receiver (RX) modules with coax TX and RX modules
-
Easy set up via USB2.0 port
Key Benefits
-
Routing RGBHV and DVI signals long distance without massive amounts of cable
-
Allows system transition to HD-SDI without changing the main router system
-
Use fiber modules for long distance runs of DVI or coax modules for shorter distances
-
Distributed concept allows the modules to be place next to others sending and receiving devices
-
Total rack space is reduced tremendously
-
Supports DVI and VGA of up to 1920x1200@60Hz
-
Tuned data rate of 1.485Gbs allows signals to pass through HD-SDI routers
-
Supports VGA-VGA, DVI-DVI, DVI-VGA and VGA-DVI signals
-
Analog video supports RGB, RGsB, RGBHV over HD-15 (VGA) type connector;
-
Allows looping output on TX for DVI or VGA local monitoring
