BNC/Fiber Converter/Extender Modules

project posted:
  • Data Sheet Available Soon

ABOUT THE PESA BNC/Fiber Converter/Extender Modules

PESA’s fiber optic video converter and extender modules modules offer a complete, palm-size solution for extending SD/HD/3G-SDI video from copper coaxial connectors over long distances using a single fiber optic connection.  The BNC/fiber transmitter (TX) module converts a coaxial input signal to a fiber optic transport; and the fiber/BNC receiver (RX) module converts a fiber optic input signal to a coaxial output.  Each device is powered from an included external power supply module.

When paired as a TX & RX module, the BNC/fiber converter/extenders transport a single channel of SMPTE 259M, 292M, or 424M serial digital video over singlemode fiber and requires no user adjustments.  Connect devices and add power to achieve perfect signal quality up to 10Km at 3Gbps.

While normally used as a TX/RX pair, an individual TX or RX module may be used stand-alone for coax to fiber, or fiber to coax conversion applications.

Features and Benefits:

  • Transmission of Multi-rate SD/HD/3G (143Mbps to 2.97Gbps)
  • Real-time, uncompressed video transmission
  • Formats supported: SMPTE 259M, 292M, 424M
  • Supports SDI pathological test patterns up to 3G
  • Full-size BNC connector for attachment to video equipment using common jumpers
  • Supports embedded audio and metadata

 

    

Specifications:

Connectors
BNC:                                                       75 Ohm, full-size, single channel
Fiber:                                                      SFP module with LC interface

Fiber Performance
Wavelength:                                             1310nm
TX Power:                                                -2.5 typical (min. -5 dBm, max. 0 dBm)
RX Power:                                               +2.5 typical (min. 0 dBm)

Power Supply
Type:                                                         External
Input Voltage:                                            100VAC to 240VAC, 50/60Hz
Output Voltage:                                         12V DC
Output Connector:                                    Coaxial Power Connector
Max Power Consumption:                        <6 watts (typical)

Physical
Status Indicators:                                     Green OK Led
Operating Temperature:                           0⁰C to 45⁰C
Physical Dimensions:                              1” (26mm) H x 1.77” (45mm) W x 3” (75mm) D                                                                                                      (*not inclusive of modules)

Part Numbers:
PCTX-C3G2F3G-PS:                               3G-SDI Transmitter E-O, BNC to LC
PCRX-F3G2C3G-PS:                              3G-SDI, Receiver, O-E, LC to BNC

Related Products

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

 
Translate »