FIPS 140-2 | IP | 4K HDMI 2.0 | JPEG

Delivering critical media signals with case-hardened security our customers expect

Overview

Secura IP receivers can decode or decrypt individually secured media flow(s) from the Ethernet IP switch using AES256 keys. The Secura IP receiver will restore, or decrypt, corresponding secured media to its native HDMI format according to the authorization that is granted for each given media signal.

In an Ethernet IP environment, Secura A/V over IP transmitters convert HDMI signals to industry-standard IP transport signals, which are then routed using a media-class, enterprise Commercial Off-The-Shelf (COTS) IP switch from Arista. The Source media is secured using FIPS 140-2 AES 256 encryption that can only be accessed by the corresponding Secura IP receiver configured for decryption of the specified IP flow.

Features

  • AES 256 encryption with static key
  • 1 GB/s payloads using JPEG light compression for extremely low latency (< 15ms)
  • PESA’s exclusive Secura Control Suite for IP configuration/control, endpoint management
  • HDMI audio including Dolby, and others
  • Available as Receiver (Rx) and/or Transmitter (Tx) endpoints
  • Video scaling

TYPICAL A/V OVER IP SYSTEM

Flexible network routing for video and audio

Secura A/V over IP modules are initially configured as paired transmitter/receiver sets, but any module can be configured as a either a transmitter or receiver using Secura control software.

  • Secura A/V over IP transmitters encrypt video data from the host for secure, encoded transport over an Ethernet infrastructure.
  • Secure video data is received by Secura A/V over IP receiver modules, which decrypts the video data sent via the transmitter module and delivers video output to the destination monitor or workstation.
  • Encrypted data is routed between Secura A/V over IP modules through an Arista COTS IP switch or routing device.
  • Only a properly configured and identified Secura A/V over IP receiver module can decrypt the IP data stream broadcast by a Secura A/V over IP transmitter.
Secure and reliable audio and video transmission

Video data between the transmitter and receiver is protected with NSA compliant, AES256 encryption, guaranteeing confidentiality of the streamed content.

Analog audio embedding/de-embedding

External analog audio may be embedded to replace original HDMI audio. Audio may also be output over HDMI video or HDMI audio may be de-embedded to a rear panel audio connector.

Power over Ethernet

Secura KVM features Power-Over-Ethernet (PoE+), providing operating power for networking communication over a single Cat_x Ethernet cable. Secura A/V over IP is compliant with PoE+ standard IEEE 802.3at. An external power supply may be added for power redundancy.

Specs & Ordering Info

SPECS

Specs

AV ConnectivityHDMI 2.0 compliant with HDCP 1.4/2.2
Video FormatAll resolutions and frame rates up to 4096 x 2160 at 60fps 8-bit, 10-bit and 12-bit, 4:4:4. 4:2:2, and 4:2:0, HDR10 and HLG
Max Video Format4K60 4:4:4
Video CodecJPEG 2000
Video ProcessingUpscaler/downscaler at receive side
AudioHDMI audio or front panel analog audio via 3.5 mm jack
Latency15 ms end-to-end (encoder + decoder)
SecurityAES-256 fixed-key encryption
ReliabilityForward Error Correction (FEC) and Quality of Service (QoS)
Clock SynchronizationPrecision Time Protocol (PTP) IEEE 1588-2008, slave/master (not required)
AV Transport ProtocolsIP(unicast/multicast), UDP, RTP, RTCP, SAP/SDP, SMPTE ST 2110
Network ProtocolsNMOS, mDNS, IGMP, TCP/IP, ARP

 

Configuration

Network BasedWeb-based configuration manager (GUI) JSON API over WebSocket, Secure Remote System console

 

Interfaces

Audio/VideoHDMI 2.0 Input (Encoder only)
HDMI 2.0 Output (Decoder only)
3.5 mm jack (TRS) analog audio input (Encoder only) and output (decoder only)
Communication1Gb Ethernet RJ45 and 10G Ethernet SFP+

 

Other Specs

TemperatureOperating 0℃ to +55℃
Dimensions200 x 116 x 23 mm
(7.9 x 4.6 x 0.9 in)
Power Supply12V DC- Power Connector
Power Over EthernetPoE+ (IEEE 802.3at)
Power Consumption15W typical
ORDERING INFO
 
SEC-IP-TX Secura Endpoint, AVoverIP, TX, Hardware Only
SEC-IP-RX Secura Endpoint, AVoverIP, RX, Hardware Only
SEPS-IP-TX Software for Secura TX Endpoint, AVoIP (No USB), Per Endpoint
SEPS-IP-RX Software for Secura RX Endpoint, AVoIP (No USB), Per Endpoint
 

Additional Resources

Brochure: Secura Command Center

Brochure: Secura IP

Brochure: Secura Touch Panel

Brochure: Secura SDN

Please contact support@pesa.com or sales@pesa.com for additional user guides or product manuals. 

For additional information on Secura IP: