Mid-Sized Routing Switchers
ASI, SD-SDI, HD-SDI and 3G-SDI
PESA’s Jaguar-3 64X64 matrix switcher routes SMPTE and ITU standard serial digital video signals; plus it supports embedded audio and other ancillary data required for HD-SDI and DVI/ASI broadcast sources. For digital cinema high definition video distribution requirements, the Jaguar-3 can be configured to switch SMPTE 372M dual-link HD-SDI in configurations up to 32X32. Jaguar-3 is perfect for SD-SDI, HD-SDI, and 3G-SDI switching applications in digital cinema, telemedicine, O&P, high end presentation rooms, satellite imaging, military command centers, and simulation/visualization environments.
Although small in size – it occupies only 2RU of rack space, Jaguar-3 is big on performance – supporting standard data rates from 270Mbps up to 3Gbps, and video transports up to 1080p/60. All inputs are auto-equalized; and with standard SMPTE formatted outputs, each signal is auto-sensed and re-clocked to the appropriate transport stream. Signals can be re-clocked up to 80m for 1080p/60. For non-standard formats, re-clocking circuitry can be set to by-pass mode.
Two independent reference inputs allow easy selection of gen-lock from a black burst or tri-level sync source. The compact frame design features front load / hot swappable card sets and includes space for an optional redundant power supply and controller module. Jaguar-3 provides control ports that allow configuring the frame for a variety of control interfaces including Ethernet control, PESA’s PERC2000 or 3500Pro, and PESA’s new Cattrax graphical user control interface; plus it can be used with PESA’s full range of control panels.
PESA’s Cattrax is an intuitive, easy to use GUI control system supporting the Jaguar-3 as well as the full line of PESA router frames. It is installed on a host PC running the Windows® operating system and communicates via an Ethernet port located on each router. For large, high-speed digital interface switching systems, the Cattrax full-feature Control and Management software application supports comprehensive configuration, diagnostics and monitoring.
The PNET series of network enabled remote control panels are designed specifically to operate with the Small Scale System Controller. Each panel is only 2 inches deep and fits in any standard rack system. The panels are connected using standard RJ-45 jacks and include a looping CATx connector for adding additional panels in series.
Specs & Ordering Info
|Number||64 Inputs and 64 Outputs|
|Connector Type||75 Ohm, self-terminating, unbalanced BNCs with auto-equalization conforming to SMPTE 259M-C, SMPTE 292M and SMPTE 424M|
|Return Loss||>15dB from 1Mhz to 1.5Ghz
>10dB, 1.5Ghz to 3GHz
|Input cable equalization||300m auto-equalization Belden 1694A or equivalent at 270Mbps
100m auto-equalization Belden 1694A or equivalent at 1.5Gbps
80m auto-equalization Belden 1694A or equivalent at 3Gbps
|Output Signal Level||800mVpp, +/-10%|
Digital Signal Performance
|Inputs/Outputs for Coax|
|Rise/Fall Time||< 600 ps, +/- 10% | SMPTE 259M
< 270 ps | SMPTE 292M
< 135ps | SMPTE 424M
|Overshoot||< 10% of amplitude ( max.)|
|Alignment Jitter||< 0.2UI , 100kHz to 150MHz
< 0.3UI, 150MHz to 300MHz
|Timing Jitter||< 1.0UI from 10Hz to 100kHz | SMPTE 259/292
< 2.0UI from 10Hz to 100kHz | SMPTE 424M
|Reference Inputs||Two independent 75 ohm BNC connectors,
0.5Vpp to 2.0Vpp; PAL, NTSC or Tri-Level sync
|Data Rates Supported||143Mbps to 3.0Gbps|
19.00W X 3.50H X 14.75D
482.6mm X 88.90mm X 372.65mm
|AC Power Connections||IEC 320C6 socket (accepts IEC 320 C5 line cord)|
|Operating Humidity||90% non-condensing|
|Control||Supports single-bus, multi-bus and XY control panels, using external system controller|
|Panel Communications||RS-485 / 3 pin detachable|
|Control Communications||RS-232 / 422 / Ethernet|
|Connector Type||9 pin D-SUB, RJ-45|
|Warranty||3 years parts and labor|
|JAG3G-64X64-BNC-1||Jaguar, 3G-SDI, 64X64, PS, PRC Control, Order Controller Separately|
|JAG3G-32X32-BNC-1||Jaguar, 3G-SDI, 32X32, PS, PRC Control, Order Controller Separately|
|JAG3G-MATRIX||Jaguar Video Matrix Card. Provides 32 inputs and 32 outputs|
|JAG3G-MAINFRAME||Mainframe Assembly w/o PS,CTRL, Matrix Card|
|JAG3G-PSFC||Power Supply, 95V-250VAC, 125W, 24VDC, with fan and control|
|PERC1500-JAG||PERC1500 Small Scale System Controller for Jaguar frames|
For PNET panel ordering info, please click here.